The cyclone separator consists of a hollow cylinder at the upper part and an inverted cone connected with the cylinder at the lower part, which form the working cylinder of the hydrocyclone. In addition, hydrocyclone also has ore feeding pipe, overflow pipe, overflow pipe and grit chamber.
The cyclone separator consists of a hollow cylinder at the upper part and an inverted cone connected with the cylinder at the lower part, which form the working cylinder of the hydrocyclone. In addition, hydrocyclone also has ore feeding pipe, overflow pipe, overflow pipe and grit chamber.
Cyclone separatore is used to separate liquid-liquid, liquid-solid, liquid-gas and other two-phase or multi phase mixtures with a certain density difference under the action of centrifugal force. The mixed liquid enters the hydrocyclone tangentially at a certain pressure to produce a high-speed rotating flow field in the cylindrical cavity.
Under the action of swirl field, the components with high density in the mixture move downward along the axial direction and outward along the radial direction at the same time. When they reach the cone section, they move downward along the wall and are discharged from the underflow port, thus forming an external vortex flow field; The components with low density move towards the central axis, form an upward internal vortex in the center of the axis, and then discharge from the overflow port, so as to achieve the purpose of two-phase separation.
As a typical equipment of centrifugal force and gravity compound force field, cyclone separator is widely used in many fields because of its simple structure, small floor area, convenient installation and operation and low operation cost.
Please write down your requirement and contact details in the following form. You can also send a message to us by this sales@lyldkj.com, we will reply to you within 24 hours.
